点击图片查看原图
- 适用车型：中高端汽车
产品简介：
埃索超力富 (Superflo)5W-20、5W-30、10W-30、10W-40、20W-50、30、40是优质传统润滑油，品质符合现代汽油、车辆最新的行业用油标准。
特征与优越性：
埃索超力富 (Superflo)5W-20、5W-30、10W-30、10W-40、20W-50、30、40系精选高质量传统矿物油和优质添加剂配方调制而成，使发动机运转可靠。埃索超力富 (Superflo)5W-20、5W-30、10W-30、10W-40、20W-50、30、40能防止有害的积炭、油泥和漆膜堆积，从而保护发动机；其所含抗磨剂能减低磨损，延长发动机的可靠使用年限。专门配制的特选等级如5W-30，10W-30等，具有节省燃油的优越性。主要特征与优越性如下：
应用范围：
埃索超力富 (Superflo)5W-20、5W-30、10W-30、10W-40、20W-50、30、40专门推荐用于所有类型的车辆。埃索超力富 (Superflo)5W-20、5W-30、10W-30、10W-40、20W-50、30、40则是轿车、轻型货车及面包车的首选。
Superflo
Automotive Engine Oil
Superflo is high quality motor oil that incorporates anti-wear protection, as well as, protection against sludge and deposit formation. The SAE 5W-20, 5W-30, and 10W-30 grades meet the highest API quality requirement (SM) for gasoline engine passenger cars, sport utility vehicles, vans and light trucks and are also ILSAC (International Lubricant Standardization and Approval Committee) GF-4 approved. This certifies that these oils meet the highest API performance standards and are preferred by most American and Japanese car manufacturers.
Features and Benefits：
The SAE 5W-20, 5W-30, 10W-30, 10W-40 and 20W-50 grades satisfy API Category SM, which is the highest API quality recommended for gasoline powered vehicles
The gasoline engine tests that describe the minimum quality for Category SM require a high level of protection against high temperature deposits, ring sticking, camshaft and hydraulic valve lifter wear, oil thickening due to high temperature oxidation, rusting, and bearing wear.
The complete engine protection provided by Superflo is the result of high quality base oils plus highly effective additives, including detergents, dispersants, and anti-wear additives, plus inhibitors against oxidation, rust, and foam.
Sludge and varnish deposits are controlled by detergents and dispersants that prevent agglomeration and settling out of minute sludge particles. Contaminants remain suspended in the oil and are drained when the oil is changed. Freedom from sludge and varnish is critical to long life and reduced wear of moving engine parts. The rust inhibitor in Superflo effectively helps retard the formation of rust in hydraulic valve lifters and other critical parts.
Cold-starting your car can damage critical engine parts if they are not adequately and rapidly lubricated. Superflo multi-grades are specially formulated for quick flow to engine components at start-up, providing engine protection.
Metal bearing surfaces in an engine appear to be smooth but actually contain sharp, microscopic peaks, called asperities. When two surfaces slide against each other under heavy loads, asperities can penetrate the lubricant film and collide with each other, creating additional friction, which reduces engine efficiency.
The friction modifiers in Superflo provide a strong oil film and reduce contact between asperities. Three grades- SAE 5W-20, 5W-30 and 10W-30 - have demonstrated potential fuel-saving benefits in the ASTM industry standard engine test. Superflo 5W-20, 5W-30, and10W-30 carry the API’s highest fuel economy rating, "Energy Conserving". These new GF-4 quality oils also provide potential fuel economy retention over the life of the oil.
Prolonged exposure to heavy-duty service at high temperatures can cause some oils to oxidize and thicken to the point that they are barely able to flow. This is called oxidation thickening and has become more common due to trailer pulling, summer stop and goes driving, and higher engine temperatures associated with emission controls and more aerodynamic engine designs. Superflo has oxidation resistance, as demonstrated in the ASTM Sequence IIIG engine test, which is designed to determine an oil’s performance under these extreme operating conditions.
Superflo SAE 10W-40 and 20W-50 viscosity grades also meet API SM requirements. Superflo SAE 30 and SAE 40 viscosity grades meet API SL requirements.
•Designed to flow at low temperatures to get to vital engine parts quickly
•Resists oxidation thickening to maintain proper flow under severe operating conditions
•Provides excellent deposit and wear protection
•Available in seven viscosity grades
•SAE 5W-20, 5W-30 and 10W-30 grades meet API SM, API “Energy Conserving” and ILSAC GF-4
•SAE 10W-40 and 20W-50 meet API SM
Applications：
Superflo is available in five multi-grades and two straight grades that provide a wide range of viscosities to meet a variety of climatic conditions. The SAE 5W-30 and 10W-30 grades are ILSAC GF-4 certified and are the recommended oils for new American and Japanese vehicles. The SAE 5W-20 is also ILSAC GF-4 certified, but it is recommended for vehicles which specifically call for this viscosity grade in the owner’s manual, including many late models Ford, Mazda, Honda and certain 2005 Chrysler vehicles.
Beginning in 1994, most automakers specified the use of ILSAC motor oils in their new car manuals. These oils carry a special “starburst” seal on the front container labels.
The SAE 10W-40 and 20W-50 grades are formulated for use in engines where extra, high-temperature protection is desired or for engines experiencing high oil leakage or consumption. Consult your automobile owner’s manual for the recommended viscosity grade for your vehicle.
Specifications and Approvals：
Exxon Superflo meets the
following industry
specifications:
5W-20
5W-30
10W-30
10W-40
20W-50
30
40
API SM
X
X
X
X
X
X
X
API SL
X
X
X
X
X
X
X
API SJ
X
X
X
X
X
API Energy Conserving
X
X
X
ILSAC GF-4
X
X
X
Typical Properties：
SAE Grade
5W-20
5W-30
10W-30
10W-40
API Service Classification
SM
SM
SM
SM
cSt at 40°C
47.0
62
71
94
cSt at 100°C
8.3
10.5
10.6
14.1
CCS, cP
5180@
5500@
6300@
6400@
-30°C
-30°C
-25°C
-25°C
Viscosity Index
153
159
137
147
Flash Point,°C (°F), ASTM D 92
200 (392)
200 (392)
200 (392)
226 (439)
Pour Point,°C (°F )
-39(-38)
-39(-38)
-36 (-33)
-33 (-27)
Gravity, API
33.6
33
29.2
30.0
Energy Conserving
Yes
Yes
Yes
No
SAE Grade
20W-50
30
40
API Service Classification
SM
SL
SL
cSt at 40°C
162
100
140
cSt at 100°C
18.1
11.5
15
CCS, cP
8200 @
-
-
-15°C
Viscosity Index
124
107
105
Flash Point,°C (°F), ASTM D 92
240 (464)
234 (453)
245 (473)
Pour Point,°C (°F )
-21 (-6)
-21 (-6)
-18 (0)
Gravity, API
27.4
27.0
27.8
Energy Conserving
No
No
No
